32
|
POWER OUTAGES
After a power outage your MagIQ Touch Controller will prompt
you to enter the date and time.
If you have the “AUTO START” option switched on in the
SETTINGS menu, your cooler or heater will automatically
restart in the mode it was last operating.
TROUBLE SHOOTING
Your MagIQ Touch Controller may prompt you to call a service
agent to resolve a service issue. If your Controller has only
recently been installed, we recommend you call your local
Dealer for support first. Otherwise, call the Service number
on the back of this manual.
Symptom
Cause
Action
The MagIQ Touch
Controller has
no display.
The cable from
cooler may not be
fitted correctly.
Refit cable.
Cable damaged or
broken.
Replace cable.
The MagIQ Touch
Controller shows
my cooler/heater is
on, but I can’t hear
the fan working.
The set temperature
has been achieved
and the cooler/heater
is in standby.
None required.
The controller is in
PROGRAM mode and
the current time period
specifies the cooler/
heater is “OFF”.
Review the schedule
via the EDIT button on
the PROGRAM home
screen.
