LCQ / LCS / LCQI / BMQ / CPQ / TBQ / TBS / TBQI / TBSI
|
5
MAGIQCOOL CONTROLLER
OPERATION cont.
If ‘02’ is displayed
(1)......Check that the water supply tap to the
cooler is turned on.
(2)......Check that your local water authority
haven’t temporarily disconnected the water in
your area.
If ‘04’ is displayed
(1)......If your cooler is fitted with a drain valve,
check that the drain is not blocked.
If these do not fix the problem then contact
your dealer or the service number near the
back of this manual. You will need to quote the
flashing number that you wrote down.
Drain Mode (Cooler switched OFF)
Pressing the and buttons at
the same time for 2 seconds will open the drain
valve and empty the water in the tank. The wall
control will display “
dr
” on the screen. Draining
the water will leave the tank clean and dry until
it is next used.
