8
|
25
10
Fig.20
Using the Remote Control
1.5 Replacing batteries in remote control
(1). Lift the cover along the direction of arrow (as shown in Fig 1
).
①
(2). Take out the original batteries (as shown in Fig 1
).
②
(3). Place two 7# (AAA 1.5V) dry batteries, and make sure the position of
+ and - terminals is correct (as shown in Fig 2
).
③
(4). Reinstall the cover (as shown in Fig 2
).
④
In winter, absence function can keep the indoor ambient temperature
above 0
to avoid freezing.
℃
Note:Absence function is only available in heating mode and it will be
exited when switching mode or setting sleep function.
Notes:
①
. The remote controller should be placed 1m away from the TV set
or stereo sound sets.
②
. The operation of remote controller should be performed within its
receiving range.
③
. If you need to control the main unit, please point the remote
controller at the signal receiving window of the main unit to improve
the receiving sensibility of main unit.
④
.When the remote controller is sending signal, “
” icon will be blin-
king for 1 second. When the main unit receives valid remote control
signal, it will give out a sound.
⑤
.If the remote controller does not operate normally, please take the
batteries out and reinsert them after 30 seconds. If it still can't
operate properly, replace the batteries.
⑥
.When replacing the batteries, do not use old or different types of
batteries, otherwise, it may cause malfunction.
⑦
.When you wonʼt use the remote controller for a long time, please
take out the batteries.
Fig.1
Fig.2
1.5 REPLACING BATTERIES
1. REMOTE CONTROLLER - cont.
