Step 7.8.1 Reflector, U-Clip and Reflector Support Installation
SECTION 7: U-T
UBE
H
EATER
I
NSTALLATION
The pictorial drawings of the heater construction in
are schematic only and provide a general
guideline of where hangers, reflector supports and
U-clips are to be installed.
To ensure proper expansion and contraction movement of
the reflectors, a combination of U-clips and reflector
supports are used. The positioning of reflector supports
and U-clips depend on the individual installation. Use
either pop rivets or sheet metal screws instead of U-clips
when installing end caps and joint pieces in areas where
impact and high wind may be a factor. The following rules
must be observed:
Description
Part Number
Reflector Support Package
03050010
Wire Form
91908004
Reflector Support Strap
03050000
Screw #8 x 3/4 (3.9 x 19 mm)
94320812
U-Clip Package
91107720
Reflector End Cap
027508XX
33 of 73
Summary of Contents for AIRA ATH Series
Page 66: ...62 of 73 ...
