3. Installation and setting
3.1.Connection computer and license plate recognition camera with 75
Ω
coaxial cable at BNC port.
3.2. Connect DC12V power supply, if the upper casing is open, the indicator light is on
3.3. When the image appears in the monitor, adjust the focus and Iris to get clear image. Surveillance area: max. 5-8 meters wide.
3.4.Digital
display: current traffic mode and its parameters.
To select various traffic mode by Rocker Switch UP or DOWN. The indicator is ON for the selected traffic mode. Five traffic modes following:
A1: normal mode
A2: 30KM/H
A3: 60KM/H
A4: 90KM/H
A5: 120KM/H
Traffic mode A1: no shutter speeds and Highlight compression function.
Traffic mode: A2, A3, A4, A5: highlight compression and electronic shutter speed functions are working at the same time.
HLC intensity is adjustable by Rocker Switch Left or Right. Set its intensity at night (or daytime when necessary).It automatically shifts according to the setting value from daytime
to night. HLC intensity
：
E1-E6.
When the intensity comes to E6 at night, it is the upmost highlight compression, the image view is much darker. Be sure to set to a
suitable intensity for best view license plates. Factory default: E2 in daytime, E6 at night.
3.5. Set shutter speeds according to vehicle
’
s speed. If there
’
s ghost image, choose a higher speed mode. If the vehicle is not moving at all, choose the shutter speed mode: A1 or A2.
3.6.When main auxiliary lights is too strong or too weak, set LED brightness value from 00 to 32 by K1 or K2. The bigger value, the brighter LED illuminator. But it has to be not
too whitish license plates. Factory default: 00 in daytime. Adjustable. 20 at night. Adjustable.
3.7. AGC setting. Enhance clearer image of license plates. Digital display: C1--C5
，
when it comes to C5, it is clearest image, but darker image.
3.8. External trigger signal input: Input external switch signal. The camera will automatically take snapshot picture when there
’
s signal input. Snapshot images can be stored in TF
card or FTP upload to designated computer.
3.9. Digital display: current traffic mode, HLC intensity, LED luminance value, AGC. Circle display them. Time interval: 5 seconds. Digital tube is off when
finishing setting. It is on again when pressing any button for re-set
3.10. Connect PC or NVR via internet for live view or recording when finish setting.
3.11. Default IP:192.168.1.4, user name: :system, password: system IE port:6002
Initialize TF card and set snapshot parameters when logging in System.
3.12.NVR access protocol
：
ONVIF, port
：
8080
