5.3 Device
Selecting ‘device’ opens a new screen that gives you the option of adjusting date, time
and language, (settings that are setup when you first turn on your device) accessing
flashlight and power settings, switching the Seek Thermal watermark that shows up
while scanning ‘on’ or ‘off’, and restoring the device back to factory settings.
5.3.1 Date & Time
This option allows you to go back and adjust formats selected when you first set up the
device. You may change time between military and standard time, and preferred date
format.
5.3.2 Language
Choose between English, Spanish, French, and German for your cameras native
language.
5.3.3 Power
Selecting the ‘power’ button will enable you to modify two settings, ‘auto’ & ‘display’. In
‘auto’ you can choose whether the device will turn off after no interaction has been had
for a selected period of time.
1 The default for ‘auto’ is set to ‘off’ to ensure the device will not accidently
trigger an automatic power off during an emergency. When on, it’s set at a
default of 15 minutes and can be adjusted higher or lower depending on your
preferences. The function can be disabled at any time by switching it ‘off’,
regardless of how much time is selected.
2 Display allows you to adjust the brightness of the LCD screen between 1-
100%. Hold the
LEFT
or
RIGHT
button down to adjust the brightness lower or
higher.
5.3.4 Flashlight
While other Reveal devices are limited to just ‘high’, ‘low’ and settings, the Reveal
FirePRO includes a Strobe light option. This feature has been designed for helping
locate downed firefighters in visually compromised scenarios.
1 In the flashlight setting, you can adjust the brightness level of the ‘high’ and
‘low’ settings, and toggle the strobe feature, which always uses 100% brightness
to ‘on’ or ‘off.’
www.
GlobalTestSupply
.com
Find Quality Products Online at:
