6
3.1.2. SC-UR0124H
①
POWER IN:
Adaptor connection terminal.
②
RS-485:
RS-485 DATA connection terminal. Be careful with polarity.
③
UTP CABLE:
Connect the UTP Cable attached with a RJ-45 Plug.
Yellow LED: Video, Green LED: Power
④
A. LEVEL:
Adjust video image level.
⑤
F. LEVEL:
Make a fine adjustment for video image.
⑥
CABLE LENGTH:
Adjust the H/L switch the depending on the UTP cable.
Maximum transmission distance L: 900m or less / H: 900m ~ 2.4km.
The distance may vary depending on the cable status.
⑦
VIDEO OUT:
Connect with the video image input terminal of DVR,
Monitor or Quads.
3.1.3. SC-UR1618H
3.1.3.1. Front
①
POWER ON/OFF SWITCH.
②
A.Level (Brightness):
Adjust the video level minutely in the following
order.
A. LVL
⇒
F. LVL
⇒
A. LVL
⇒
F. LVL
※
If the video level is too high, it may cause crosstalk depending on the DVR.
In this case, please lower the video level of the each channel.
③
F. Level(Color)
④
VIDEO IN Indicator:
It turns on the LED when the video signals are
connected.
⑤
CH OUT:
You can put out the video signals of the channel selected from
CH SEL (
⑥
) and display the video selected in a monitor or adjust the
video signals of the selected channel easily.
⑥
CH SEL:
Select the channel you want to put out through the CH OUT
port (
⑤
).
① ② ③ ④ ⑤ ⑥
⑥ Cable Length
⑤ F. Level
④ A.Level
⑦ Video Out
Summary of Contents for SC-UR0124H
Page 9: ...8 4 2 SC UR1618H ...
