SeeedStudio Grove-125KHz RFID Reader, Manual, Page: 2 / 6

Arduino Raspberry Pi
Caution
The platforms mentioned above as supported is/are an indication of the module's
software or theoritical compatibility. We only provide software library or code examples
for Arduino platform in most cases. It is not possible to provide software library / demo
code for all possible MCU platforms. Hence, users have to write their own software
library.
Getting Started
Note
If this is the first time you work with Arduino, we firmly recommend you to see Getting
Started with Arduino before the start.
Play With Arduino
Hardware

Step 1. Prepare the below stuffs:
Seeeduino V4.2 Base Shield Grove - 125KHz RFID Reader
Get One Now Get One Now Get One Now

Step 2. Connect Grove - 125KHz RFID Reader to port D2 of Grove-Base
Shield.

Step 3. Plug Grove - Base Shield into Seeeduino.