User Guide (Tech Document)
© 2008
-2019 Seeed Technology Co., Ltd. All rights reserved. www.seeed.cc
44
/
49
Note:
The screws (that fasten gateway onto the wall) are not included in the package. Please prepare
screws according to the wall materials (recommended screw diameter: 6mm).
6.2.2
Installation Precautions
1)
In mountainous or thunderstorm-stricken areas, please take lightening protection measures. For the
fiberglass LoRa antenna, you will need to install a lightening arrester and make sure it is connected
to the ground. Besides, the gateway should be mounted lower than the lightening rod.
2)
When installing the gateway in the outdoor environment, the connected part should be protected
with waterproof tape, to enhance waterproof performance and lengthen device lifespan. As shown
below, use self-adhesive tape to protect the connection. Take a rubber tape at the length of 10cm ~
15cm, pull it to twice of that length
wind the tape clockwise to the connected part of the antenna.