4
Space, environment and air requirements
The GS2 Automatic Needle Seeder is designed as a tabletop model. The
space requirements are as follows:
Length = 6.5’ to 10’
Width = 32 inches
Height = 28 inches
Weight = approx. 100 lbs. for 6.5’
A sturdy working table allowing at least 4 inches in excess of length and
width is suggested to support this machine. The table should be able to
withstand the weight of the machine and 3 filled trays at a minimum.
As this machine is manufactured using high-grade aluminum it is perfectly
capable of withstanding the hot and humid conditions of most greenhouses,
however you should avoid running this machine in or under a water source.
The GS2 and GS3 Automatic Needle Seeders were engineered to operate
using only compressed air as its source of power. No electricity is
required. This machine requires 80 PSI at 5 CFM to operate all
components.
