Seedburo Equipment Company | 9000AG Manual Revision 1.0
4
Setup
:
Remove the platter from the scale.
Locate the Bubble level.
Use the adjustable feet to get the bubble in the center of the circle. See picture below.
Make sure platter pins are aligned with the screws. Wiggle platter side to side it should be
secure.
Locate the power cord and plug it into the back of the scale.
UNIT IS CONFIGURED FOR
115VAC 60HZ. DO NOT PLUG IN 230VAC or unit will be damaged.
You are now ready to use the scale. Use switch on back panel to power the scale on.
NOTE:
To meet the NTEP specifications and to get the best performance from
your scale a stable surface free of vibration and wind is required
Level the Scale using the adjustable feet. Bubble should be inside circle.
Below picture of back panel connectors and power switch.
