Operating Instruction
1. Plug the charging cable into the Seecode Cup Cooler Heater and
the other end into the cigarette lighter socket of your car or any
other similar connector.
2. Please choose one of the following modes:
a.
Press the cooling function button to cool beverages. The
button turn lightly blue.
b.
Press the heating function to warm up beverages. The
button turn lightly red.
3. To switch off the device, click on the respective mode again.
Note:
•
For a good result, use bottles, cans, cups, etc. that fit perfectly in
the holder.
•
For regular beverages, the average cooling and heating time is
about 30 minutes or more.
Mobiset GmbH – Rösrather Straße 333 – 51107 Köln
Tel.: +49 22 19 89 52 0 – Fax: +49 22 19 89 52 39