EN I SEECODE Foldable water bath with massage function
Technical data
Dimensions: Height when unfolded 290 mm, when folded 170 mm
Outer dimensions: 390 x 410 mm
Tub depth: 180 mm
Weight: 3 kg
Temperature range: 35° - 48 ° Celsius
Rated voltage: 110 V/ 220 V
Rated frequency: 60/50Hz
Rated power: 420 W Safety category
Opening and closing the water basin
Remove the cover on the opposite side of the display.
O Pulling the basin apart
Keeping the bottom of the basin pressed down, take one edge of the basin and lift
it upwards to the maximum position, then take the other edge and lift it upwards in
the same way. Make sure that both sides are fully raised. Then fix the left and right
support frames in the basin at the corresponding recesses inside.
O Folding the pool
Loosen the support frames on both sides of the pool, place them one on top of
the other on the bottom of the pool and press the pool edges on the left and right
sides down towards the floor at the same time.
Do not place your feet or hands on the pool rim when using the foldable water
bath to prevent it from collapsing.
ATTENTION
Never use the footbath without water as this may cause damage to the machine
parts. Make sure that the water temperature is below 40° C.
