15
14
Specification
Keypad
3pcs of 1.5V AAA / LR03 Battery
≤
6μA
≤
40mA
50pcs
315MHZ/433MHZ(±75KHz
)
ABS plastic
Temperature: -20°C~55°C
Humidity: 80% (non-condensing)
141×96×14.5mm
Product Name:
Power Supply:
Standby Current:
Disarm by RFID Current:
Expandable RFID Card/Tags:
RF Frequency
：
Housing Material:
Operation condition:
Size (L×W×H):
Maintenance
Keypad requires adequate maintenance to make sure it works
properly and
to
prolong its life.
Regular check &
things to avoid
1.
Make sure the keypad is enrolled into control panel before use.
2.
The power supply of keypad should be checked as often as
necessary to avoid any
loss in
transm
ission
distance caused by
low battery.
3.
Check the keypad regularly to ensure the system works properly
in case of emergency.
4.
Please install the keypad in
cool, dry, shaded location.
5.
Do not install the keypad
near any heat source (eg above a radiator)
.
6.
The keypad is made of ABS. Please keep it away from strong light.
7.
In the case of a fault,d
o not
attempt to disassemble to the
product, please contact your retailer if your product is still under
warrranty
.
Maintenance
Light dusting or clea
ning
with a soft cloth
is fine
.
Lightly
wipe the
surface
with
a soft cloth with dilute
d
alkaline detergent then
wipe again with a dry cloth.
