Besides, the device is attached IR light camera lens and 4 IR lights. User can
choose to turn on the IR light mode according to the condition to make the night
vision better.
4) Connect to computer: There is a slight difference in time for different computers to
identify the hardware. Please wait patiently during the period. If the computer can’t
identify the hardware, please make sure your operating system, drivers and USB
interface cable work and connect properly. Then, connect the device to computer
again.
5) The devices memory function uses a built-in high-capacity polymer lithium battery.
Please charge the battery fully after user have used out the battery first five times.
By doing so, user can enlighten
the maximum capacity of the battery, reaching the
standard working hours.
6) When the memory capacity isn’t enough, the blue light and red light both flashing for
5 seconds at the same time. The device will save the file automatically, then switch
off. If user needs to continue the record, please spare some capacity first.
