TECHNICAL SUPPORT: (800) 998-6880
VER 05.17.07
INSTALLATION TIPS:
IMPORTANT!!
Read this instruction sheet completely and your monitors instructions
before beginning the installation.
Note: Most License plates do not require modification. However, please
look over camera mounting and placement options prior to making
modifications to vehicle.
Step 1.
Remove license plate, if necessary cut or file a ¼ slot above the license
plate mounting holes as shown below.
Step 2.
Install the License plate bar camera over the face on the top edge of the
license plate; make sure the screws are secure.
DO NOT OVER TIGHTEN!!
Over tightening may damage the camera mounting hole locations.
