4
Connection Guide
The CVR8F uses HDCVI technology to provide a High Definition image over standard coaxial cable.
This means you will require RG59 or RG6 coaxial cable and a separate power cable to each camera.
You may even use existing cable from an Analogue CCTV system however you unfortunately cannot use
any pre-made cables with a common earth such as the RCA4CHLOOM10M.
1.
Mount the 8 Cameras as required and connect the BNC video connector to your coaxial cable
and 12vDC power connector to the power cable.
2.
At the recorder, connect each of the Coaxial cables to the BNC inputs on the rear.
3.
Ensure your camera power supply is connected to each of the cameras power cables.
4.
Connect the
12V Power Supply
to the CVR8F.
5.
Plug power adaptor into a Power-point.
6.
Switch CVR8F on from back of device. Then hold Power button for 3 seconds.
7.
The power LED at the front of the CVR8F should now be illuminated and the unit will make a
loud beep sound to indicate it is powered.
8.
Connect the included mouse to the USB port on the front or back..
9.
Connecting your local network or modem to the CVR8F (we recommend doing this last step after
all the cameras have been configured).
Summary of Contents for CVR8FPACK
Page 2: ...1...
