Important-Safety Precautions:
This device of which operation is subject to the following two conditions:
1/ This device may not cause harmful interference
2/ This device must accept any interference received, including interference that may
cause undesired operation.
•
To prevent fire or shock hazard, do not expose this device to rain or moisture. Do
not use near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement,
or near a swimming pool.
•
To avoid electrical shock, do not open this device.
•
This device should be operated to use only the power supply included with it or
provided as an accessory.
•
Do not overload wall outlets and extension cords as this can result in the risk of fire
or electrical shock.
•
Do not attempt to service this device yourself. Refer servicing to qualified personnel
only.
Caution:
Changes or modifications not expressly approved by the Party responsible for
compliance could void the users authority to operate the equipment.
Notice:
The changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
IMPORTANT NOTE:
To comply with the FCC RF exposure compliance requirements, no
change to the antenna or the device is permitted. Any change to the antenna or the device
could result in the device exceeding the RF exposure requirements and void user’s
authority to operate the device.
System Installation:
Connections Diagram:
1. Right audio - (red)
2. Left audio - (white)
3. Transmitter: Video input - (yellow)
Receiver: Video output - (yellow)
4. Channel selector
5. Power LED
6. Antenna connector
2