17
1. Manual
mode: Slide
Mode Control
switch to
M
to enter
Manual
mode. In this mode, the receiver channel won’t change until you
press the
Channel Select Button “CH”
2. Channel Scan
mode: Slide
Mode Control
switch to
L
to enter
channel scan mode. In this mode, all the available channels will display
one by one looping in turn per 5s. So you can watch the situations from
up to 4 different cameras via one receiver.
Tip:
Channel-Scan function can also be activated by pressing and holding the
Channel Select Button "CH"
for more than 5 seconds in Manual mode.
Press the
Channel Select Button
again to deactivate Channel-Scan function.
Note:
Press the
Channel Select Button "CH"
at the channel scan mode, the current
channel will be looped to the next channel immediately.
Slide the
Mode Control
switch to
M
to exit the channel scan mode.
Summary of Contents for NiteCam2
Page 9: ...Product Basics 9 Receiver Camera...
Page 20: ...www securitymaninc com...
