LCDDVR4-500S
Quick Start Guide
HARDWARE INSTALLATION
SM-3802 (Dummy Camera)
SM-218 (Wired Camera)
1
Using a Philips head screw driver, remove the back cover of the SM-3802 (dummy camera) and insert 2 AA batteries (not included). After inserting
the batteries, re-attach the back cover and secure the camera with mounting screws provided.
Connect the male ends of the 60ft VP cable to the female ends of the camera. To prevent electric shock and damage to the camera, please make sure to
properly insolate the camera’s power and connections if being used in an outdoor application. Determine where the camera will be mounted and use the
screws provided to secure.
NOTE: Make sure that the Red LED locator in the front of the camera is flashing before mounting the camera to a desired location.
NOTE: Make sure you do not mount them no more than 60 ft from the DVR unless you have purchased additional BNC cable. Adjust the cameras to the
desired viewing angles.
