STEP 1
Open the camera cover by lifting up on the housing latch. Switch the ON/OFF power
switch to the ON position. Rechargeable batteries (3pcs) are factory installed.
Please be sure to close and secure the latch of the camera cover when done.
STEP 2
Using the screw provided, securely mount the camera to a desired location.
STEP 3
Insert the cameras decoy cable into the decoy hole located on the camera bracket.
Adjust camera angle accordingly.
1 x Spotlight dummy camera with
solar panel and braket
SOLAR PANEL
BATTERY
COMPARTMENT
DECOY
CABLE HOLE
MOUNTING
HOLES
HOUSING LATCH
SPOTLIGHT
DECOY CABLE
ANGLE
ADJUSTMENT
MOTION
SENSOR
MOUNTING
BRACKET
3 x Rechargeable batteries
(pre-installed inside camera)
2 x Security warning stickers
Mounting Screws
User’s Manual
Contents
Product Basics
Setup and Installation
Specifications
Solar Panel
Spotlight
Quantity
Type
Dimensions
Function
Quantity
Type
Lumen
Function
1
Amorphous silicon solar panel
6 1/4” (L) X 1 9/16“ (W)
Charge batteries
1
White COB LED
110
Auto On/Off based on motion detection
(Stays on for 30-second per detection),
up to 360 square feet of lighting
PIR Motion Sensor
Rechargeable Batteries
Dummy Camera
Quantity
Type
Distance
Angle
Function
Quantity
Type
Function
Dimensions
Weight (Gross)
1
PIR
Up to 30ft
90°
Detect motions and infrared heat
3 (pre-installed inside camera)
Ni-CD AA 1.2V 600mAh
Provides power to PIR, LED Spotlight, and
retain charges from the solar panel
8.5”(L) x 3.75”(W) x 2.75”(H)
1.12 lb.
STEP 1
STEP 2
STEP 3