4
Connecting Network Cables
•
Connecting Network Cables
The ST-POEAF-S08 has 8 10/100Mbps Ethernet ports. All ports are PoE-enabled. Each port
incorporates 10/100Mbps support via UTP Cat5/5e cables.
The 8 PoE ports will automatically activate when a compatible device is identified.
Legacy devices that are not compatible will not be supplied power. This feature allows users to
freely and safely mix legacy and Power over Ethernet compatible devices on a single network.
This Switch supports 10Mbps Ethernet or 100Mbps Fast Ethernet and runs both in half and full
duplex mode using two pairs of Category 5 or 5e cable.
All ports are Auto-MDI type port. The switch can auto negotiate to MDII or MDI-X type, so you can
connect RJ-45 cable regardless of whether it is a standard or crossover cable.
Description
•
Front Panel:
This is the front panel of the ST-POEAF-S08, showing the 8 RJ-45 ports and LED display.
PoE
LINK/ACT
Power
8-port
• Port 1X to 8X :
Standard 10/100Mbps Ethernet port. The Switch supports 10Mbps Ethernet or 100Mbps Fast
Ethernet and runs both in half and full duplex mode using two pairs of Category 5 or 5e cable.
All are 10/100Mbps switch ports as well as 802.3 af PoE enabled ports.
All PoE port will automatically activate when a compatible terminal is identified. The ST-
POEAF-S08 will supply power through the Ethernet port to the connected PoE
device (PD). It
also supports legacy devices that are not compatible. In this case the PoE port will not supply
power to those devices. This feature allows users to freely and safely mix legacy and Power
over Ethernet compatible devices on the same network.
These RJ-45 ports are Auto-MDI type port. This switch can auto negotiate to MDII or MDI-X
type, so you can connect the RJ-45 cable regardless of whether it is a standard or crossover
cable.
Description
•
DC Power Jack and Power switch:
The DC power jack and power switch are located on the rear panel right side of the
ST-
POEAF-S08
.
OFF
ON
Use only the supplied AC/DC adaptor. The use of any incompatible adaptor may cause damage
to the equipment and void the warranty.
Press the power switch to turn this device ON or OFF.
