background image

 

Connecting Network Cables

 

 

Connecting Network Cables

 

 

The ST-POEAF-S04 supports 5 10/100Mbps Ethernet ports. Port 2 to Port 5 are PoE enabled 
ports. Each port incorporates 10/100Mbps support via UTP Cat5/5e cables.

 

 

The 4 PoE ports will automatically activate when a compatible device is identified. The ST-POEAF-

S04 will supply power through the Ethernet port to the connected PoE

 

device on ports 1 thru 4 only.

 

 

Legacy devices that are not compatible will not be supplied power. This feature allows users to 

freely and safely mix legacy and Power over Ethernet compatible devices on a single network.

 

 

This Switch supports 10Mbps Ethernet or 100Mbps Fast Ethernet and runs both in half and full 

duplex mode using two pairs of Category 5 or 5e cable.

 

 

All ports are Auto-MDI type port. The switch can auto negotiate to MDII or MDI-X type, so you can 

connect RJ-45 cable regardless of whether it is a standard or crossover cable.

 

 
Description

 

 

 

 

 

 

Front Panel:

 

 

This is the front panel of the ST-POEAF-S04, showing the 5 RJ-45 ports. 

 

 

 

 

 

 

 

 

 

 

 

 
 

• Port 1X to 5X :  

 

Standard  10/100Mbps  Ethernet  port.  The  Switch  supports  10Mbps  Ethernet  or  100Mbps  Fast 

Ethernet and runs both in half and full duplex mode using two pairs of Category 5 or 5e cable.  

 

• PoE Port: PoE2X to PoE5X  

 

All are 10/100Mbps switch ports as well as 802.3 af PoE enabled ports.  

 

All PoE port will automatically activate when a compatible terminal is identified. The ST-
POEAF-S04 will supply power through the Ethernet port to the connected PoE

 

device (PD). It 

also supports legacy devices that are not compatible. In this case the PoE port will not supply 
power to those devices. This feature allows users to freely and safely mix legacy and Power 
over Ethernet compatible devices on the same network.  

 

These RJ-45 ports are Auto-MDI type port. This switch can auto negotiate to MDII or MDI-X 

type, so you can connect the RJ-45 cable regardless of whether it is a standard or crossover 

cable.

 

 

 

DC Power Jack:

 

 

The DC power jack and power switch are located on the front panel left side of the 

ST-

POEAF-S04

.

 

 
 

 

 

 

 

 

Summary of Contents for ST-POEAF-S04







Reviews: