ST-POE16 / ST-POE24 USER MANUAL
11
Chapter 2
Device Installation
(Here
ST
-POE24 is taken as an installation guide, which also applies to
ST
-POE16.)
2.1
Installation Notes
To guarantee device longevity and your personal safety, please follow notes below.
Safety Alert
Wear antistatic gloves while installing, and connect the device to power after finishing other installations.
Use the included power cord to power the device.
Make sure the input voltage matches the value which is marked on the device's label.
Place the device in a well-ventilated and dry environment.
Do not open the cabinet of the device.
Disconnect the device from the power supply if cleanup is required for the case.
Position the device away from strong current or electro-magnetic fields.
Cautions
There is a seal covering one of the screws in the case of the device. In the event a repair is needed, please keep this
seal intact. The user should not break the seal without permission of the service agent, to avoid a warranty voiding
situation.
Environmental Requests
Temperature/Humidity
Item
Temperature
Humidity
Operation Environment
32°
F
– 104°
F
10% - 90% RH (non-condensing)
Storage Environment
-40
°F
-158°F
5% - 90% RH (non-condensing)
Antistatic Precautions
Dust may lead to electrostatic absorption. To protect the device from static electricity harm, please pay attention to
the following:
Keep the device environment air clean. (A regular dusting is necessary)
Make sure the device is grounded well.
