ST-IP6FE QUICKSTART GUIDE
15
15
2.
Screw the three screws half-deep to the mounting base.
Hammer the Screws
Figure 2-6
3.
Connect the corresponding power cable, network cable,
audio and alarm cables.
4.
Align the screw holes to the inserted screws, hook the camera
body to the screws, and route the camera body to secure the
camera with the screws.
5.
Screw the partially installed screws into the wall.
6.
Install the camera cover to the camera body, and fix them by
tightening the lock screw on the camera cover.
