22
22
Steps:
Feed the plugless network cable
⑦
through the lock nut
⑥
,
1.
waterproof rubber gasket
⑤
(rubber gasket inset ridge must
face waterproof endcap), and the water-proof endcap
④
in
order.
Crimp an RJ-45 network plug
③
onto the end of the cable,
2.
taking care to insert the twisted pairs of wires in correct order.
Place the O-type gasket
②
onto the end of the camera’s
3.
network interface socket
①
.
Insert the network plug
③
into the camera’s network interface
4.
socket
①
.
Insert the water-proof rubber gasket
⑤
into the waterproof
5.
endcap
④
, and secure lock nut
⑥
with the water-proof
endcap
④
.
Align the snap on the water-proof endcap
④
with the notch on
6.
the camera’s network interface socket
①,
and then secure the
water-proof endcap
④
to the camera’s network interface
socket
①
to finish installation.
ST-IP4FB·Quick Start Guide
