v2.0 10/26/10
3
INSTALLATION AND OPERATION
1. UNPACKING and HANDLING
Each unit is shipped assembled and factory tested.
Ensure that all accessories are removed from the container before discarding packing material
2. MECHANICAL INSPECTION
Inspect the front and rear of the equipment for shipping damage. Make sure the equipment is
clean, and no connectors are broken, damaged, or loose. If equipment appears to be
damaged or defective please contact your distributor or SecurityTronix at 1-610-429-1511 for
assistance.
3. PRODUCT PICTURES and WIRING DIAGRAM
ST-CCTV-VBAC-TX
ST-CCTV-VBAC-RX
4. HARDWARE CONNECTIONS and ADJUSTMENT
a. Connect the video source (e.g., security camera) to the ST-CCTV-VBAC-TX’s BNC
port using coaxial cable with BNC connectors.
b. Connect two wires from the UTP cable to the ST-CCTV-VBAC-TX’s wire block. Make
note which color wire is connected to the wire block’s polarity. You will need to ensure
the same wires and polarities are connected to the ST-CCTV-VBAC-RX’s wire block.
c. Connect the same UTP wires to the ST-CCTV-VBAC-RX’s wire block. Again, make
