4
Making Connections
1.
Connect the AC power supply cable to the camera’s power
leads.
2.
Connect the camera to the CVR with a 75Ω coaxial video
cable.
3.
(Optional) Connect unshielded twisted pair (UTP) control
cable between the camera’s labeled RS485 leads and the PTZ
controller. Be sure wire polarities (+/-) are the same at each
connection.
4.
Connect power supply’s AC plug to a suitable AC power
outlet.
Operation
Default Address:
1
Default Baud Rate:
9600
Setting Address
On your PTZ controller,
CALL preset 95
to enter the
OSD MENU
. The
symbol will indicate your current selection. Using the joystick or
up/down arrows, navigate to
SYSTEM SETTING
and press
OPEN
to
enter.
Summary of Contents for HD-COAXINATOR ST-HD-IRPTZ-2MP
Page 10: ...9 ...
Page 11: ...10 ...
Page 12: ...11 Version 1 0 3 25 15 2015 North American Cable Equipment ...
