ZEBRA-24.60
ZEBRA-24.60
User Manual
47
October 17, 2019
2.3.7.2.14
After the set up is complete, click the button “Save” to save the configuration in
the nonvolatile memory of the sensor. After that the program will switch to
“Standby mode”.
To return to the factory settings, press the button “Return to the factory
settings”.
2.3.7.2.15
Disconnect the cable from the USB-slot on the transceiver.
2.3.7.2.16
Close the cover of the configuration elements on the transceiver.
2.3.7.3
The remote control of the sensor implements by means of the interface RS-485.
It is connected to the PC via interface converter which is delivered on request.
The operation principle via RS-485 is equal to operation via USB-cable.
3
Technical service
3.1
General instructions
3.1.1
Timely and complete technical service during exploitation is one of the
important conditions to maintain the sensors in working order and to keep the
stability of parameters during the mean life time.
3.1.2
Technical service is not required during storage and transportation.
3.1.3
Perform all the works given in the appropriate schedule during the technical
service. Correct the failures and revealed.
Summary of Contents for ZEBRA-24.60
Page 1: ...SECURITY SENSOR ZEBRA 24 60 User manual CE Certificate of compliance No PS 19 015 ...
Page 33: ...ZEBRA 24 60 ZEBRA 24 60 User Manual 33 October 17 2019 Figure 2 8 Figure 2 9 ...
Page 34: ...ZEBRA 24 60 ZEBRA 24 60 User Manual 34 October 17 2019 Figure 2 10 Figure 2 11 ...
Page 40: ...ZEBRA 24 60 ZEBRA 24 60 User Manual 40 October 17 2019 Figure 2 18 ...
