Security Labs SLW-163, Owner'S Manual

Page: 10 / 25

Users\Documents.
2. In Windows Vista, there are two points you need to notice:
• Vista's Security level is higher than Windows XP/2000. For the 'Set Record Path'
function, you will need to add the add the Device IP address to IE's 'Trusted sites'
first. To do this go to: Tools > Internet Properties > Security >Trusted sites > Sites
> Add.
In Vista, there is a prompt to add Trusted sites when the Set Record/
Alarm Record path is clicked.
• You cannot set the Windows System Root Directory as you will do for the
Record/Alarm Record Path. This prompt only pops-up in Vista.
For Operator
Pan / Tilt Movement
Click and hold on an arrow with the blue circle to manually move the pan / tilt
camera mechanism. Letting off your mouse button will stop the selected
movement. Automatic scans can be done with the vertical or horizontal double
arrows. Clicking on the stop button to their right will stop the automatic scans.
Note: The infinity icons “Switch” and “Switch Off” are reserved for future use.
Preset
Up to 8 preset positions can be entered for easy access to commonly viewed
points of interest. Manually pan / tilt the camera to the first view desired, and click
the word “Set”. Manually pan/ tilt the camera to the second desired view, select 2
from the drop list and click on “Set”. Manually pan/ tilt the camera to the third
desired view, select 3 from the drop list and click on “Set”. Continue this process
for up to 8 preset positions. Recall any preset by selecting a number from the
drop list, and click on “Go”.
Resolution
Select either VGA (640x480) for a better picture, or QVGA (320x240) for faster
transmission or less storage space required for recordings..
Mode
Select either 50Hz, 60Hz (USA indoors), or Outdoor to properly sync your camera
to the lighting of the view.
Brightness and Contrast parameters
Click the + or - icons to adjust the brightness and contrast of the camera image.
Default All