Security Labs Best Picture Quality - JPEG2000, User Manual

Page: 50 / 56

49
CHAP. 7 Programmer reference
CHAP.7 Programmer reference
1) Connector Pin Assignment
No Description NO Description
1 DCD Data Carrier Detect 6 DSR Data Set Ready
2 RxD Receive data 7 RTS RS232C: Rx/Tx data
3 TxD Transmit data 8 CTS RS232C: Rx/Tx data
4 DTR Data Terminal data 9
5 GND Signal Ground
2) RS232 ASCII-CODE
This ASCII information is provided only as reference material for programmers
to aid them in using these RS-232 ASCII primitive commands for integration into user
developed software and applications
(The following table is based on 16ch DVR.) All ASCII-Code is 1 Byte.
REC ‘R’ DOWN ‘J’ PTZ ‘T’ KLOCK ‘C’ CH5 ‘5’ CH12 ’@’
STOP ‘S’ LEFT ‘H’ ZOOM ‘Z’ ULOCK ‘O’ CH6 ‘6’ CH13 ’#’
PLAY ‘P’ RIGHT ‘K’ FRZ ‘F’ QPLAY ‘Y’ CH7 ‘7’ CH14 ’$’
Pause ‘A’ NEXT ‘N’ MODE ‘D’ CH1 ‘1’ CH8 ‘8’ CH15 ’%’
SERCH ‘E’ ENTER 0x0d PIP ‘I’ CH2 ‘2’ CH9 ‘9’ CH16 ’^’
MENU ‘M’ - ‘<‘ SEQ ‘Q’ CH3 ‘3’ CH10 ’0’
UP ‘U’ + ‘>’ J.SHU ‘L’ CH4 ‘4’ CH11 ’!’
Jog / Shuttle
Please input ‘L’ command to activate J/SHUTTLE function using keyboard of PC.
Shuttle 0 degree “&>0”[enter] Shuttle Left 10 degree "&<1"[enter]
Shuttle Right 10 degree "&>1"[enter] Shuttle Left 20 degree "&<2"[enter]
Shuttle Right 20 degree "&>2"[enter] Shuttle Left 30 degree "&<3"[enter]
Shuttle Right 30 degree "&>3"[enter] Shuttle Left 40 degree "&<4"[enter]
Shuttle Right 40 degree "&>4"[enter] Shuttle Left 50 degree "&<5"[enter]
Shuttle Right 50 degree "&>5"[enter] Shuttle Left 60 degree "&<6"[enter]
Shuttle Right 60 degree "&>6"[enter] Shuttle Left 70 degree "&<7"[enter]
Shuttle Right 70 degree "&>7"[enter] Shuttle Left 80 degree "&<8"[enter]
Jog Minus "&-"[enter] Jog Plus "&+"[enter]
Shuttle : After inputting a command once, it will keep performing the command until next
command.
Jog : It makes the stage staying after one time operation by command input like Button
operation.