SECURITY HUB STARTER KIT, Quick Start Manual, Page: 2 / 4

+
Registration. Controller Setup
Run the application. To register an account, click the REGISTRATION button and follow
the instructions on the mobile application screen.
After successful registration, set up the controller, following the instructions of the
controller's setup wizard.*
*
Adding And Installing Sensors
1.
Unpack the sensor .
In additional sensors, purchased separately from the Security Hub kit, put the jumper on the Rmod
plug .
In the Astra-361 RK water leakage sensor and the Astra-RI-M RPDK remote control keyfob (not
included), set the mode of radio Mode 2 and frequency Letter 1 using DIP switches in accordance
with the sensor's instruction manual
B
C
2.
Open the sensor housing, ensure that jumpers and switches are set correctly (highlighted in
black in the figure)*
To add more controllers, use the button in the OBJECTS tab of the
MAIN page.
+ *
*
2
Rmod
Lit
Lit
Rmod
1
2
DIP switch