Security Command XT30, User Manual

Page: 35 / 54

System Setup XT30/XT50 User’s Guide 31
Date and Time
User Code Level: Master only.
Function:
Allows you to change the current date and time displayed
on the keypad and used by the system for schedules and Display
Events.
Setting the Date and Time
1. Access the User Menu.
2. Press COMMAND until
TIME? displays. Press any Select key.
3. The keypad displays the current day and time. Press
the COMMAND key to display the current date. Press the
COMMAND key again to make any changes.
4. The keypad displays
TIME DAY DATE
. Select
TIME
to change
the time. The keypad displays – : AM PM. Enter the
current time and select AM or PM .
5. The display changes back to
TIME DAY DATE
.
6. Select
DAY
to change the day of the week. The keypad
displays
SUN MON TUE WED
. If the current day does not
display, press the COMMAND key. Select the correct day.
7. Select
DATE
to change the date. The keypad displays:
MONTH: -
Enter up to two digits for the month.
Press COMMAND.
DAY: - Enter up to two digits for the day.
Press COMMAND.
YEAR: -
Enter up to two digits for the year.
Press COMMAND.
The display returns to TIME DAY DATE . Press the Back Arrow
key to exit the User Menu.
Display Events
User Code Level:
Master, Standard, Limited, or Scheduled.
Function:
Allows you to view up to 100 (XT30) or 200 (XT50) past
events that occurred on your system from any keypad. Any event
older than 45 days automatically clears from the system memory.
Once the full 100 or 200 events are reached, any new event received
clears the oldest event from the list.
Refer to Appendix A for detailed Display Events information.
Request Service?
User Code Level : Master only.
Function : Allows you to send a Request for Service message to the
central station when there is a problem on your system.
After the Display Events option in the keypad User Menu, the
REQUEST SERVICE? option displays if a master code was used to
enter the menu. This feature does not display if it is not enabled
on your system.
If your system is monitored by a central station and you need to send
a Request for Service report to the central station, press any Select
key while
REQUEST SERVICE?
displays. After the Request for Service
report is sent, the keypad displays
REQUEST MADE
for four seconds.
If there is a problem with the telephone line connected to the system,
you must contact our service department directly for assistance.