manualshive.com logo in svg

Security Command XR10 Executive Series, User Manual

Share
Download
Security Command XR10 Executive Series User Manual Download Page 2

Copyright © 1995 - 1997 Digital Monitoring Products, Inc.

Information furnished by DMP is believed to be accurate and reliable.

This information is subject to change without notice.

Copyright © 1995 - 1997 Digital Monitoring Products, Inc.

Information furnished by DMP is believed to be accurate and reliable.

This information is subject to change without notice.

The XR10 panel is UL listed for Grade A Household Service as well as Commercial Burglary Service.

The XR10 panel is UL listed for Grade A Household Service as well as Commercial Burglary Service.

Silencing an Alarm

All/Perimeter and Home/Away Systems

1. While the alarm bell or siren is sounding, enter your user code. The keypad displays DISARM    SILENCE.

2. Press the SELECT key under SILENCE to stop the bell or siren. This does NOT disarm the system.

3. If your system is programmed to send an Abort (alarm cancel) report to the central station, the keypad displays ALARM CANCELLED.

Area Systems

1. While the alarm bell or siren is sounding, enter your user code. The system silences the alarm bell or siren.

2. If your system is programmed to send an Abort (alarm cancel) report to the central station, the keypad displays ALARM CANCELLED.

Silencing an Alarm

All/Perimeter and Home/Away Systems

1. While the alarm bell or siren is sounding, enter your user code. The keypad displays DISARM    SILENCE.

2. Press the SELECT key under SILENCE to stop the bell or siren. This does NOT disarm the system.

3. If your system is programmed to send an Abort (alarm cancel) report to the central station, the keypad displays ALARM CANCELLED.

Area Systems

1. While the alarm bell or siren is sounding, enter your user code. The system silences the alarm bell or siren.

2. If your system is programmed to send an Abort (alarm cancel) report to the central station, the keypad displays ALARM CANCELLED.

Summary of Contents for XR10 Executive Series



























Reviews:

No comments

Brands by name

Popular brands

Load more brands