call
(972) 474-6390
or email
NEED
HELP
Two-Year Limited Warranty
Visit
securitybrandsinc.com/warranty/
for details
2 of 2
© 2021 Security Brands, Inc. All rights reserved.
I-14R433-EN Rev. B (10/2021)
WARNING! AUTOMATIC GATES CAN CAUSE
SERIOUS INJURY OR DEATH!
ALWAYS CHECK THAT THE GATE PATH IS
CLEAR BEFORE OPERATING!
REVERSING OR OTHER SAFETY DEVICES
SHOULD ALWAYS BE USED!
3.
you want to program and release other button.
4.
now programmed.
5. Repeat procedure for second button if desired.
NOTE: The second button can be paired with the
MODE SELECTION
(MOMENTARY/LATCH)
1. On Ridge Remote, press and hold down both
buttons and pay attention to remote LED.
2.
both
buttons.
3.
button you want to change modes on until LED
NOTE: If the relay on the Ridge 2.0 Transceiver is
already latched (on), it cannot be unlatched unless
the remote button is set to latch mode.
NOTE: If needed, follow the same procedure for the
second button.
HOW TO USE
1. Make sure you are in range of Ridge 2.0
Transceiver you want to control.
2. Press remote button paired to transceiver long
3. Transceiver will respond and operate gate/door.
NOTE: If the transceiver does not respond, make sure
If it is not, check the battery. If it still does not
respond, complete the pairing procedure again.
Go to
securitybrandsinc.com/ridge/
for
more helpful resources.
Step 3
Step 4
INSTRUCTIONS
RIDGE REMOTE (433 MHZ)
Model
14-R433
