securio B 35, Operating Instructions Manual

Page: 14 / 92

14
SECURIO B 35
12/2012
english
Shredding CDs
(only in cut size: 3.9 mm, 5.8 mm, 4.5x30 mm)
• Only feed the material
into the insertion slot
of the safety element
(splinter protection).
Shredding credit cards
Feed the cards through the CD slot
when the cut size is 3.9 mm, 5.8 mm and
4.5x30 mm. For machines with a cutting
width of 1.9x15 mm, use the paper feed.
Note:
To completely separate
the materials shredded,
you can insert the CD
bag supplied.
• Feed the paper to the middle of the paper
slot. The light barrier starts the cutting
unit automatically. Therefore, with thin
paper strips, make sure the light barrier
detects them.
 Three seconds after the light barrier in
the paper feed opening is free again, the
cutting unit is switched off automatically
and the shredder switches to standby.
Note:
You can fold the safety
element upwards to
shred larger quantities
of paper. This makes
it easier to access the
feed opening.
Switching off the shredder
• Press the operation button.
 The “Ready for operation” indicator goes
out.
• Set mains switch at rear of paper shred-
der to „0“.
5 Operation
WARNING
Before switching the machine on,
make sure that you observe all
safety instructions.
Switching on the shredder
• Set mains switch at rear of paper shred-
der to „I“.
• Press the operation button.
 The “Ready for operation” indicator lights
up.
Shredding paper