4
I
www.securikey.co.uk
Functionality and Operation.
Features:
1. Manufacturer default code is 1-2-3-4-5-6
Function of Code
a) Unlock safe lock system
b) Change code
Operation
The lock when first used will be set to its default code 1-2-3-4-5-6. Enter the 6 digit code, each entry
will be accompanied with a beep and a final single beep when the correct code is used. Multiple (3)
beeps at the end of the code indicates incorrect code. Once the correct code has been entered move
the handle from a horizontal to downward vertical position and gently pull to gain access.
Wrong Entry Penalty
Entry of four (4) consecutive invalid codes results in a 5-minute penalty time period.
a) The unit beeps at 5 second intervals indicating that it is still in the penalty time period.
b) While the system is in penalty time, the entry pad buttons remain unresponsive.
Pressing buttons during penalty will not restart or lengthen the penalty time period.
It will continue to count through the 5 minute penalty time period.
c) While the system is in penalty time, removal of the batteries will interrupt the
penalty time countdown. Upon reinstallation of the batteries, the entry pad continues
to count down until the 5 minute penalty time period expires.
Standby Status
In order to conserve battery power, the system will revert to standby status if there is no
key press within 10 seconds. Standby status is indicated by two short beeps.
Automatic Re-lock
The safe lock system automatically relocks after 6 seconds of being opened by
a valid code.
Low Battery Alert
a) Repeated beeping (8 beeps) during an unlock operation indicates that the battery is
low and needs immediate replacement.
b) The manufacturer recommends the use of a 9-Volt standard alkaline battery (Duracell or
Energizer brands are recommended) replaced annually.
DIGITAL ENTRY PAD
