SECURENET UMU, Quick Start Manual

Page: 8 / 12

Installing the Ethernet kit (PoE only)
The Ethernet accessory kit includes a
lock nut, a waterproof end-cap, a rubber
gasket and an O-gasket.
Insert the Ethernet cable through the
plastic lock nut and waterproof end-cap.
Attach the rubber gasket.
Place the thin O-gasket onto the end of
the camera Ethernet socket.
Connect the Ethernet cable to the
camera Ethernet socket.
Slide the rubber gasket into the bottom
of the waterproof end-cap, then twist
the end-cap to lock it into the camera
Ethernet socket.
Screw the lock nut and end cap together,
ensuring the rubber gasket is in place.
This will complete the seal around the
Ethernet cable.
For protection against moisture, wrap
electrical tape around the unused 12V
adapter socket.
The Ethernet kit is not required if powering with the 12V power adapter.