148
Step 3: ETM® System Configuration
Configuring the Call Recorder
The Call Recorder is separately purchased and licensed. Complete
instructions for configuring the ETM Call Recorder components are
provided in the
Call Recorder User Guide
. Refer to those instructions to
complete Call Recorder configuration. You can do that now and then return
to these instructions, or complete the instructions in this guide and then
refer to the
Call Recorder User Guide
to complete Call Recorder
configuration.
Continue with "Configuring Management Server Settings" on
page 148.
Configuring Management Server Settings
All access to ETM System components is controlled by the ETM
Management Server, commonly referred to as the ETM Server. The ETM
Server is a background processing engine that controls the ETM Appliances
and integrates the ETM System components with your data network. As a
security feature, connections from remote client applications (those installed
on a computer other than the one on which the ETM Server is installed)
must be authorized on the ETM Server computer.
Authorized ETM System Clients are those whose IP addresses appear in the
Client Hosts list for the Server. You can also use a mask (i.e., 10.1.1.255) to
authorize a group of IP addresses. The local ETM System Client installed
on the ETM Server host computer is authorized by default. Remote Client
Hosts may have external IP addresses.
To authorize a remote ETM System Console to connect to an
ETM Server
1.
On the ETM System Console main menu, click
Servers | Server
Management
. The
Server Administration Tool
appears.
2.
Click the
Client Hosts
tab.
Authorize
Remote Client
Connections
