T/AML2C/080
28th November 2019
e)
When the device has successfully connected it will prompt you by saying “ Connected to
router successfully” you will then be asked to set a password for the device.
f)
When the password is set you will be asked to give the device a name, this is what it will
appear as in the app.
g)
You will be directed to the devices screen where you can view the device state and select
to view its feed.
Further Information
The device has an estimated battery life of 6 months based on
10 minutes of operation a day. The unit will enter a “sleep”
state to conserve battery; to “wake” the device, remotely,
simply tap the feed of the device you want to wake.
If a device goes “offline” pull the screen down on the device
page to refresh the feeds
To enable the camera to record events a Micro SD Memory
Card must be inserted into the device, the card may require
formatting. This can be done by going on to the Device’s
Settings and then “Storage Management” and then tap
“Format SD Card”
N.B:
When the memory card is full new recordings/images will over-
write the oldest recordings/images.
front door
