background image

T/AML2C/080                                                                                                                

28th November 2019 

Before Setup 

 

Remove the Backplate from the Doorbell, unclip the battery  

           cover and remove the battery. 

 

There is a clear plastic film over the top of each battery.  

          Remove the films and replace the batteries. 

 

Connect the supplied USB Lead to the device and charge for 8 
hours.  

          (This will require a 5V USB Mains Plug—not supplied) 

Important: 

The product may power up when the batteries are first  

inserted; however, the device will not function correctly during the  
installation procedure unless it has been fully charged.  

 

Download the iCSee App 

(NOT iCSee Pro) 

to your phone by 

searching in the App Store or by  scanning the QR Code below. 

 

Turn off Mobile data (3G/4G) and connect to the available Wifi. 

Important

: When setting up the iCSee app you 

should allow any permissions it requests as  
declining them may prevent the app from  
functioning correctly; the screenshot displayed 
on the left shows what permissions are  
required. 

Summary of Contents for AML2C









Reviews: