2
V-4072MD INSTALLATION GUIDE | DIGITAL MONITORING PRODUCTS
PLUG IN THE CAMERA
5
Remove the cap from the end of the power
supply.
Standard Power Connection
Connect the included 12 VDC power supply and
optional extension cable to the camera power
connector. See Figure 6.
If you are not using Wi‑Fi, connect a network
cable to the camera Ethernet connector.
PoE Connection
Connect a network cable to the camera Ethernet
connector. On the other end of the connector,
connect the cable to a PoE switch or injector.
WIRE THE CAMERA
4
Before connecting the Ethernet cable or PoE cable, install
the waterproof Ethernet cap if desired. Refer to Figure 5.
Figure 6: Ethernet and Power Supply
Ethernet/Wi-Fi
Power to Camera
Camera
Mounting Plate
Reset/WPS Button
Cap
Power Supply
MOUNT THE CAMERA
6
Attach the camera to the mounting plate with
three included screws. See screw hole locations in
Figure 6.
Figure 5: Installing the Waterproof
Ethernet Cap
a
b