Nnn-0000nn
© Copyright 2013 SecureALL Corporation
Page
7
of
7
All Rights Reserved
9. There is a small switch (Fig. 6) just to the left and below the CAT-5 socket in the router.
Check to make sure the switch is to the right, in the "normal" position.
Figure 6
10. Holding the router by its dome, align the connecting holes with the 8-32 screws in the 4O
box. Slide the router onto the screws and rotate the dome until the router is securely in
place. If the router has difficulty going onto the screws, loosen the screws slightly and
re-attach. If the router is too loose after attachment, tighten the screws slightly and re-
attach. (See Fig. 7 for final assembly)
Figure 7
Switch
