Drilling and nailing
X
1
2
3
Battery replacement
Battery replacement
1
2
3
C1
C2
4
5
6
Insert new batteries ensuring
correct polarity.
Dispose old batteries
according to local
regulations
M3.5, AB
type screws
Remove
battery
strip
Commissioning and mounting the THS
On the Secure Controls PTD, Press the
Menu button
at the top to enter the main
menu.
1
Navigate to
Settings
menu using
+
/
-
buttons and press
Home-Away
to enter.
2
3 Navigate to
Add Sensor
option using +/- buttons and press
Home-Away
to enter.
6 PTD will search for the sensor and display the sensor serial number. To verify the
number, check the sticker on the sensor. Press
Home-Away
to confirm
The
Remove battery
strip
screen appears. Make sure to remove the battery strip on
the THS and press
Home-Away
to confirm.
5
4
Select Zone
screen appears. Select the respective zone by using +/- buttons and
press
Home
-
Away
to enter.
7 When the sensor is paired, a confirmation message will appear.
Note:
You will need Secure Controls PTD installed
and commissioned to perform these steps.
8 Mount the THS.
1
2
-
+
Menu button
Note:
If the battery strip is already removed, do the following:
1. Open the battery cover and remove both the batteries.
2. Wait for 8-10 seconds and re-insert the batteries.
3. Replace the cover back.
