Page 14 of 56
Premier 211 User Manual
BGX701-075-R03
8.
LC-ON 1 represents the relay state (ON/ARMED).
9.
Supply will be permanently in ON state
SCC: Not used
10.
NOT USED
11.
NOT USED
12.
WAN communication indicator - Indicates presence of 4G/3G/GPRS
communication modules.
13.
Indicates that the meter is paired or ready for pairing with the HAN device
14.
Service status mode indicator - Indicates that attention and due service by
authorised personnel is needed for maintenance e.g. Real Time Clock
failure.
15.
Phase annunciators - Indicate the presence of supply voltages at the
respective phase. The annunciators also flash if reverse current is detected
in any of the phase.
Table 2: Operations possible through Premier 211 push buttons
S. No.
Function
Details
1. Parameter Navigation
Premier 211 may be configured to display a desired list of parameters. These
parameters are logically grouped to appear as a different display page, each
of which is assigned an individual display ID.
2. Metrological LED
configuration
The metrological LED can be configured to flash on desired energy channel
using the parameter navigation function.
Note:
This is applicable only till midnight cross over, following which, it switches to
the factory configured settings. The same is applicable for a power
interruption.
2.4
Using the display
Two modes are available for viewing the displays in the meter:
●
Push Button Mode
●
Auto Mode
