![Securam ScanLogic Optical Programming Instruction Download Page 2](http://html1.mh-extra.com/html/securam/scanlogic-optical/scanlogic-optical_programming-instruction_1231669002.webp)
Penalty Time
1)
The entry of 5 incorrect codes will cause
the lock to enter Penalty Time where the
lock is lock down for a period of 5 minutes.
You cannot open the lock during the
penalty time period.
2)
During the Penalty Time, the keypad will
beep every 5 seconds and the buttons on
the keypad are not operable. Entering
additional codes during penalty time does
not extend penalty time.
3)
Two beeps indicates penalty time has
expired and the beeping will stop, enter a
valid code to open the safe lock.
4)
Note: If after penalty expires you enter an
invalid code two more times, the lock will
go back into penalty time.
Troubleshooting
1)
Lock beeps 10 times after
fingerprint/code entry: This is the low
battery indicator. Replace the battery
with a new Duracell or Energizer battery.
2)
Green lights after input of fingerprint or
code – this is an indication of a valid
fingerprint or code entry
3)
Red lights after input of fingerprint or
code – this is an indication of an invalid
fingerprint or code entry