ProLogic L01
Operation Instructions
7
PLEASE REPLACE THE BATTERY IMMEDIATELY. Operations, such as enrolling or deleting, are not
permitted with low battery condition.
Use one 9V alkaline battery. Manufacturer recommends to use Duracell
TM
or Energizer® Alkaline
batteries.
3.0 Code Management
The ProLogic L01 comes with two default codes:
•
Super Code (ID00) is 111111
•
Manager Code (ID01) is 123456
It is strongly recommended that both these default codes are changed before the lock system is put into
service.
The ProLogic L01 has the capability to add one additional user code, in addition to the default codes.
•
ID00 is the Super Code – opens the lock, preforms programming and has the ability to turn on
Manager Mode. By default this code is preprogrammed as 1-1-1-1-1-1.
•
ID01 is the Manager Code – opens the lock and preforms programming functions. By default this
code is preprogrammed as 1-2-3-4-5-6.
•
ID02 is a User Code.
3.1 Enrolling New Users
Step1: Press the Menu/OK button.
Step 2: Using the
and
, scroll to the System Menu and Press Menu/OK
Step 3: The display will prompt you to enter a valid Administrator code
Enter either the Super Code (ID00) or the Manager Code (ID01). The “Select Menu” message will be
displayed as follows:
Step 4: Scroll
to the menu selection “Enroll New User” and Press OK
Step 5: The following informational screens will appear:
