Secura QSF210, Instruction Manual, Page: 10 / 20

10
2 3
14
1
1. Locate your stud. Verify and mark the center of the stud by finding the stud edges using an awl, a thin nail, or an edge to edge stud finder.
2. Position the wall plate assembly
14
at your desired height and line up the holes with your stud center line. Level the wall plate assembly
14
and mark the hole locations.
3. Drill pilot holes using a 7/32 in. (5.5 mm) diameter drill bit.
IMPORTANT : Pilot holes must be drilled to a depth of 2 ¾ in. (70 mm). Be sure to drill into the center of the stud.
CAUTION:
Avoid potential personal injury or property damage!
●
Drywall covering the wall, must not exceed 5/8 in. (16 mm)
●
Minimum wood stud size: common 2 x 4 in. (51 x 102 mm) nominal 1½ x 3½ in. (38 x 89 mm)
●
Stud center must be verified
7/32 in.
(5.5 mm)
2 ¾ in. (70 mm)
Max. 5/8 in.
(16 mm)
STEP 2A Attach Wall Plate to Wall
Wood Stud Option