6
STEP 1 Attach Brackets to TV
M6
M8
FLAT BACK
ROUND BACK
CABLES
INSET HOLES
1.1 Select TV Screw Diameter
1.2 Select TV Screw Length
Hand thread screws into the threaded inserts
on the back of your TV to determine which
screw diameter (
M6 or M8
) to use.
a
b
If your TV has a flat back, AND you want your TV closer to
the wall, use the shorter screws (a).
Use the spacers and longer screws (b) to accommodate:
• Round/irregular back TVs
• TVs with inset mounting holes
• Extra space needed for cables
Too Short
Too Long
CAUTION:
Verify adequate thread
engagement with your screw/
washer/spacer combination
AND TV bracket (STEP 1.3).
-
Too short will not hold the TV.
-
Too long will damage the TV.
Correct
Standard configurations
are shown. For special
applications, or if you
are uncertain about your
hardware selection,
contact Customer Service
at 1-877-689-1665.
Summary of Contents for QLL23
