8
SECURA AUTOMATIC MILK FROTHER
1. Based on the instructions under assembly, choose the correct whisk and set it within the milk
container. Insert the whisk on the axle in the cup.
2. Add milk to the container. Do not add more milk than the maximum line, which is marked
inside the container. (There are two MAX marks and one MIN mark. DO NOT fi ll over the
top MAX line when using the heating whisk. DO NOT fi ll over the 2nd MAX line when using
the frothing whisk.)
WARNING:
DO NOT operate without minimum level of liquid in the container.
DO NOT operate when there is no whisk set in place.
3. Close the lid on the container and make sure it is sealed.
4.
(a)
Frothing and heating or heating only.
Press the On button once and release immediately. Ensure that both blue and red
indicator lights are lit. When the milk is frothed or properly heated, the blue light will go
off. When the red light starts fl ashing, it indicates the milk is ready for use.
(b)
Frothing only
Press and hold the On button. After 2-3 seconds, the blue light will be lit. When it stays lit
for 65 seconds and then the red light fl ashes for 30 seconds indicating, the frothing is
complete.
Note:
If the blue light begins fl ashing, then there is too much milk in use and the machine
is in danger of malfunctioning. At this time, turn off the machine and pour out milk
until it is below the maximum line. Turn the machine back on.
Instructions
Copyright © 2015 – Secura Inc. - All rights are reserved. http://www.thesecura.com
